Video - Australian International Pedal Prix (2009)

Major sponsors of the 2009 Australian International Pedal Prix - Uni South Australia - have put together this sweet video of this year's event.
It was up online just two days after the event was finished, so hats off to their film and editing crew for such speedy work!

Everyone loves a video (except people on really slow internet connections) and we really like ones that finish with interviews with guys from our team.

Video above not working for you?

Try this link: http://www.youtube.com/watch?v=ya5u4827kcQ

Read more or comment...

BYR wins the 2009 Australian International Pedal Prix

Yes! Bendigo Youth Racing (BYR) has won the 2009 Australian International Pedal Prix. Seven laps ahead of ‘Trisled Fresh Racing’!

Winners of the 2008 edition ‘Tru Blu Racing’ lost their grip on second place late in the race and eventually finished third, 9 laps behind BYR.

We finally cracked the 1000 kilometre mark (but only just), having completed 466 laps of the 2.15 kilometre course. (We did the sums - 1001.9 kilometres)

Our new trike, BY-09, managed to survive weaving through the traffic of 229 vehicles for 24 hours as well as we could've hoped.

I've tried to capture the general vibe from the weary boys:
We’re stoked, excited and relieved to have won this 24 hour race again. We raced clean, our pace was consistent throughout the race and across all of the team members and we won in a trike we built ourselves. It doesn’t get any better than that.

It’s very surreal. We have been designing, building and training for this since last October and now to have achieved our goal is extremely satisfying. We had a great time over the whole weekend – which included getting our bus bogged on the way there!

In what we believe will be Bendigo Youth Racing’s final outing it is fantastic to finish on a high note.

Special thanks to:

• Tim Ralton of Decked Out Coaching for helping us toughen up on the wind trainers,
• Pit Master Crowey, Moo, Tippet, Milky, Joe, Joe, Gav, Matt and Rowan,
• all of our parents who travel interstate to cheer us on,
• all of our awesome sponsors who gave us most of the materials we used to build the vehicle for free or really, really cheap.

Just for the record, our sponsors are:
McCullochs Hydraulic Engineers, L.W. Nankervis Performance Boats, Polymer Daystar, Warehouse Sales Electrical, PTR Engineering, Jimmy Recard Racing Components, Lorraine Lea Linen, Heavenly Threads and Decked Out Coaching.

We’ll produce a more detailed race report with plenty of pictures over the next couple of days, but in the meantime check out the overall results here: http://www.hpvresults.com.au/live/overall.html

Read more or comment...

Quick Snaps from the Australian International Pedal Prix

We're still coming to terms with the fact that we crossed the line first. Wow!

We will post up plenty of photos and our race report in the next few days, but in the meantime we thought we'd collate some of the quick snaps from our Twitter feed during last weekend's Australian International Pedal Prix...

   
       

   

Read more or comment...

Pic of 'BY-09' in race trim

Here 'tis - 'By-09' ready to race

Read more or comment...

BYR updates over the race weekend - Australian International Pedal Prix - 2009

We'll there comes a time when we have to step away from the nerd box & onto the race track.
That time is now.

There won't be any more formal 'blog posts' here until after the race is run and won this weekend in Murray Bridge. For more info about the Australian International Pedal Prix (AIPP), head to the official event website at: http://www.pedalprix.com.au/

You can, however, follow our progress via irregular updates to Nige Presto's Twitter account, his Facebook profile or through the nifty box in the upper part of this blog.

Those links again:
Twitter - http://www.twitter.com/nigepresto
Facebook - http://www.facebook.com/nigepresto
BYR Inc Blog - http://www.byrinc.com/  (PS.... You're already here!)
Oh and if you are trackside this weekend in Murray Bridge - come and say 'Hello'.

Read more or comment...

BY-09 : Forward Thinking

Development of 'BY-09' began in the later stages of 2008. 
Soon after last year’s event at Murray Bridge, it was decided that the team would enter a 2009 team with the plan to completely re-design the entire vehicle. Original development was centered on the radical new drive system that would be required to lower the seat as close as possible to the ground.

Forward thinking :: Front Wheel Drive System

Amazingly, plans were put in place to develop a system that would put the lowest part of the seat within 50mm of the ground and still maintain high efficiency. The radical thinking required us to design a system that would drive the front wheels, such systems had been developed by teams before with limited success such as Flora Hill's 'N4Sir' in 1999 and Bendigo Senior's 'Moby Diff' in 1998. Our prototype is pictured here.

Obviously such a system would require almost every part to be constructed in-house, including

• hubs,
• swivel hubs,
• drive shafts,
• brakes,
• universal joints, and
• a central drive mechanism that would divide the power from the chain and deliver it to the two front wheels.

Easy, really!

An enormous amount of time and effort was dedicated to this task by Cal and we were able to get a prototype up and running around 13 weeks ago. (Cal is pictured early in our campaign working on the gig) Unfortunately the drive system suffered some technical problems that were considered too difficult to solve within the time frame that remained.



So,  rear wheel it is!
In the end, the backup plan was deployed: The same canopy, but a slightly higher centre of gravity with rear wheel drive, front wheel steer.

BY-09 – Piece by Piece:

The final vehicle features a full composite frame and seat, as well as composite steering components.

The driveline has a multi point roller setup as well as custom built, narrow-spec front wheel hubs, based around a Sturmy Archer setup.

The drive is delivered through ‘SRAM Red’ Cranks and Derailleur with a ‘double tap ‘ flat bar road bike shifter. Although it uses 10 Speed equipment, the cassette only has 6 cogs, this is to provide space for the fully enclosed rear wheel guard and because so many gears are unnecessary.

Anti-Fog Solution

The vehicle has been tested over the past 6 weeks with significant time dedicated towards the development of anti fogging systems. The final design introduces fresh air as well as removing used air with the use of a series of vent’s and high flow fans. Under testing situations, the screen was able to remain un-fogged through conditions that dropped below freezing and in steady rain. In both circumstances the rider clocked over an hour in the vehicle at race pace.

Daryl's final thoughts on BY-09 as a package

From BYR Inc 2009 Campaign

In the end, the resulting vehicle will have hopefully come a long way towards solving some of the many problems that have affected BYR in the past.

Many thanks must go to all the members of the team for producing what I see as an incredible vehicle.

Thanks must also go to our fantastic sponsors who have also helped out with the construction of the vehicle by supplying materials and parts.

See you all in a few days time

- Daryl King

Technical Director

Bendigo Youth Racing Inc

Read more or comment...

Riders announced for BYR's 2009 Australian International Pedal Prix campaign

We have a team!

A while ago, we asked you how you picked a team. In the past few days, we’ve gone through the process ourselves with a team vote. 

We are proud to present to you our 2009 Rider Line-up:

Riders: (pictured top row then bottom row, left to right)

Cal Ridge
Daryl King
Dave Maud
Deven Pearce
Jarrod Henderson
Mark Anson
Nigel Preston
Troy Hutchins

Emergencies / Pit Crew:
Adam King
Matt Anson

Pit Crew:
Chris Crowe
Tristan Tippet
Jake Cathcart
Marcus Sloane
Joe Frawley

Each team member was asked to number each of the possible riders 1-9 strongest to weakest, excluding themselves, based on fitness and ability to handle a vehicle on the track.

Here's what some of the guys had to say about our line-up:

“I think this is the strongest team we’ve ever had.” – Daz
“It all sorted itself out in the end.” – Chooka
“I’m just glad I made the team, I haven’t had much time to train with the guys and they are all super fit, so they haven't had much chance to see where I'm at at the moment.” – Nige
“Good on it.” - Troy

Read more or comment...

Troy Hutchins

And finally, we meet Troy. At 16 years young, he’s the ‘grasshopper’ of our team who led Flora Hill SC’s victorious Old Bearded Mate team across the line first at last year’s RACV Energy Breakthrough. There’s a 9 year gap between the oldest team member (Nige) and Troy.

Name: Troy ‘Chomper’ Hutchins
Age: 16, the grass hopper of the team
Where do you live: Spring Gully. Home of Callan Ridge. (mothers lock your young daughters up!)

What is your job and where do you work?
Apprentice welder, East End Engineering, East Bendigo.

How does your job connect to BYR?
Well, Daryl might need a horse float or a dog trailer one day.

What’s the best about being in BYR? Having a laugh and the friendship.

What’s part of BYR do you find most challenging?
Getting everywhere without my P’s

Read more or comment...

Matt Anson

We usually have a few Ansons at our races – Big Anson, Little Anson and Norma too. Here we meet Matt...
Name: Matt Anson (aka ‘Little Anson’)
Age: 18

Where do you live:
Kennington birth place of Kenny kevs brother “Calvin”

What is your job and where do you work?
Apprentice Fabricator at Australian High Performance Catamarans, Bendigo

How do you use your skills from building catamarans in BYR?
We’re able to get free mylar and cheap resin.

What’s the best about being in BYR?
Everyone has said it but it’s a good one: the mateship and good times we have at the dream Factory.

What’s part of BYR do you find most challenging?
Being fully commited to training and building the vehicle for a couple of months

Best HPV Moment or memory?
For me the best moment was winning my first 24 hour race, the 2007 Wonthaggi HPGP. We won by 39 laps.




What’s the best crash you’ve ever seen / been involved in ?
Well I haven’t been in too many big crashes myself but the best that I have witnessed was when Trisled’s ‘Chic-a-chow’ hit the pit lane pole at about 45 km/h.  
(They destroyed the cross member and there were pieces flying off the canopy. Chic-a-Chow is pictured below prior to that crash)

Read more or comment...

Mark Anson

As we quickly approach this year’s big race, we thought it was high time we introduce you to the rest of our team. We kick off this series of three profiles with one of our tallest & strongest team members, Mark ‘Chaz’ Anson.

Name: Mark ‘Chaz’ Anson (aka ‘Big Anson’)

Age: 21

Where do you live? Kennington, birthplace of Kenny Kev… Not much happens in Kennington.

What is your job and where do you work? Apprentice Electrician, at Industrial Conveying Australia in Bendigo

How does your skills as an electrician connect to BYR? Well, Daryl might need some more power points in the shed...

What’s the best about being in BYR? Being with a bunch of mates, who have the same interests to build the best vehicle possible.

What part of BYR do you find most challenging? The amount of time it takes to build the vehicle and train. My girlfriend is very patient and tolerant of the commitment I’ve made to the team. The freezing winter night rides aren’t that much fun. Fitting in this new vehicle is a bit challenging too – it’s a lot smaller than our previous spec canopy.

Best HPV Moment in memory? Breaking the distance record at the 2005 Energy Breakthrough in Bendigo Senior’s Bukkamalazir (below). It was a perfect race and my first win.



What’s the best crash damage you’ve ever seen? BYR at last year’s AIPP. I went to bed at 6pm with a trike in good condition with only a few race scuffs and scratches.


Then I awoke at 1am to see a bike held together by race tape, zip ties and being able to see the wheels in what should be an enclosed wheel canopy (see above). Also reading the nights pit report which included Rowan “hitting a triceratops at full noise”.

We've almost completed the team line-up...

Read more or comment...

Changing shapes from BY-08 to BY-09

Two weeks ago, we unveiled our latest vehicle ‘BY-09’ for the upcoming 2009 Australian International Pedal Prix (AIPP). It’s been our most popular blog post yet. Whilst we’ve worked on all areas of the vehicle, the most visible change is to the vehicle’s aerodynamics. This new shape has come about through some fresh thinking with the aim of reducing the overall width, height and length.

Here’s some insight into our canopy development process…

Looking back before moving forward

Early concepts began towards the end of 2008, when as a team we reflected on the performance of ‘BY-08’ during the 2008 AIPP. The main conclusions pointed towards three areas:

• the need for a reduction in width, so that the vehicle would be more maneuverable through traffic.
  
  
• Improved visibility was another key objective, so that riders could see hazards in all conditions.
  
  
• The third and perhaps the biggest weakness was the strength of the canopy. In the past BYR has suffered from having an incredibly fast aerodynamic vehicle at the start, but little more than a sack of Kevlar and race tape come Sunday morning! 

How do you reduce a vehicle’s width and know it won’t tip over?

The first aim was to design a vehicle that could be a considerable amount narrower and still offer satisfactory level of stability around the bends.

From here we constructed a number of prototype frames before we were satisfied with the performance in terms of stability and drive system efficiency. From the final prototype, that I will talk more about in the coming weeks, we were able to determine the exact clearances and sizes required both to meet the event regulations and the ergonomics of each rider. At this point we worked closely with Bendigo South East College (BSE – formerly known as Flora Hill Secondary College) to ensure that the canopy would work for both teams. The school’s prototype chassis was more advanced earlier in the year and so it used to determine the canopy specifications.

A New Shape (but with some elements of old)

The shape is quite different from our BY-08 shape, but features some traditional BYR characteristics:

• The tail is pointy much like all previous designs however the keen observer may have noticed the absence of the integrated rear wheel pod.
• The profile, when viewed from the front or behind, follows the trend of tucking in over the top of the wheels, however the tuck is much more gradual compared to previous designs.
• The front of the vehicle is much more abrupt, this is to keep the vehicle to a length of 2700mm and maintain a crank length of 175mm.
• You will also notice that the windscreen is a lot further forward and is constructed from a curved piece of plastic, this has also helped to alleviate the fogging problem that has plagued BYR like a sick dog for a number of years.
• The roof is also lot flatter, enabling the rider just enough room to pedal and corner. The need for an arc or a parabolic type profile from the front is not necessary as it creates a large amount of excess frontal area.
• The other key difference is an elongated access door. This door is almost twice the size of previous designs and improves the serviceability of the internal workings.

 From CAD to polystyrene foam…

The design was completed on CAD using a series of lofts, the design itself took many hours to complete and was certainly a challenging task for resident CAD man Crowey. Once completed the design was sent to a Melbourne firm to machine the profile out of a large block of polystyrene foam. Astoundingly in only three days, over the Easter weekend, the plug was machined and ready for pick up. This was a little more efficient than the three months that it had taken with the 03, 04 and 06 plugs and the cost was quite reasonable too!

… and from plug to mould
Once the plug returned home the task was to give it a light sand to remove any blemishes then seal the plug in a coat of Epoxy resin before a coat of build primer was added. This was promptly rubbed back waxed up and a PVA release agent applied. The plug was then shipped to BSE were the students constructed the mould, released it, rubbed back any blemishes and waxed it up. This process from the completion of the design took only two weeks.

First Canopy

The first canopy was produced by students at BSE. This enabled them to effectively prototype our canopy as well as enable the students to complete their vehicle a little earlier. From the school’s design, we opted to make a number of small changes to increase the strength of the vehicle but generally the two canopies are very similar. This project has been a great way to develop skills and connections between BSE and BYR.

The finished product:
a Canopy of Carbon, Kevlar and Foam Core

The final design of the BYR canopy features a layer of carbon fiber as well as Kevlar and a polyurethane foam core. The critical areas towards the front, around the wheel and the roll bars all feature a foam sandwich construction with both carbon and Kevlar on either side of the foam. In the les critical areas foam ribs have been used with a single layer of Kevlar. Throughout the canopy west system epoxy resin has been used and the whole project has been vacuum bagged, reducing the resin content and forcing all the little fibers together.

Daryl’s final thoughts

"Overall I think the profile is reasonable as always if it was to be done again things would be done differently. The size is interesting I would think that the height of the vehicle would not be a lot more that other teams perhaps it is slightly wider than other vehicles but not by a significant amount." - Daryl King, BYR Chief Engineer

BY-09 Canopy Specifications:

Length	2700mm
Width	770mm
Height (floor to roof)	740mm
Height (ground to external roll bar)	930mm
Ground clearance	40mm
Materials	Carbon, kevlar, epoxy, polyurethane foam
Weight	6.8kg

Feel free to compare the table above and post a comparison with your vehicle’s canopy.

Read more or comment...